CENTROID T400 Control

T-400 CNC Control for Lathe and Turning Centers

High performance, user-friendly CNC controls for Turning applications Now with Windows 7 OS, Solid State Hard drive, USB ports.

OEM CNC Controls packages are ready to install

Centroid's CNC controls are the fastest and easiest to integrate onto a new machine. The controls arrive ready to install with the control panels preconfigured for your particular machine, saving hours -- if not days -- of installation time. PLC ladder logic is also preprogrammed for your particular machine. The T-400 is available with our affordable DC brush axis motors OR our new super powerful AC Brushless axis motors.

A powerful control with user-friendly operation Centroid T-400 console can be mounted in a variety of ways for the best operator position

  • Cut parts the first day with CENTROID's straight forward operation.
  • Get more work through a machine with faster setups.
  • Produce more parts per hour with a better surface finish.
  • Spend less time programming and more time making chips.
  • Bring in more work and bid on higher paying jobs.

Useful Tools for quicker job turn around

  • Stop and restart the job at any point to make diameter or tool offset adjustments.
  • Toolpath Graphics show you the cutter path before running the job.
  • Complete override control of feeds and speeds.
  • Useful Help Screens guide you thru Setup and Programming.
  • Large Color LCD display is easy to read.

High Speed Processing for 3D machining

No other control has such a large easy-to-read display. With a special no-glare coating, the CENTROID LCD display is sealed from liquids and greasy fingers. With the high res 15" display, Programming, Editing, and viewing tool paths is now a joy.

  • 2000 line lookahead accel/decel.
  • High Block throughput.
  • Continuous tool motion with no hesitation or dwell.
  • Reduces bench time grinding and polishing.
  • Take lighter cuts faster for better surface finish.
  • Run programs with very short moves at high feedrates.
  • Stop and restart at any point.

Large color LCD display for easy setup and programming.

No other control has such a large easy-to-read display. With a special no-glare coating, the CENTROID LCD display is sealed from liquids and greasy fingers. With the high res 15" display, Programming, Editing, and viewing tool paths is now a joy.

  • Large bright letters.
  • Color tool path graphics shows cutter comp moves
  • Easy to view from any angle
  • No flicker, no ghosting, long life, runs cool
  • Perfectly flat for accurate graphics
  • Sealed from shop coolant and oils
  • Special no-glare coating

Dedicated control panel for all common turning functions

  • Clearly labeled controls for each axis and direction.
  • Dedicated buttons for spindle and coolant controls.
  • Spindle speed override and Feedrate override.
  • Tool Check, Feed Hold, Cycle Start, Rapid override, Incremental and Continuous Jog, Single Block.
  • Customize with Tool index +/-, Clamp/Unclamp, Vac on/off, & more.
  • Extra auxiliary buttons are programmable for special applications.
  • Fully sealed, coolant proof, long-lasting in shop environment.
  • Tactile feedback, raised buttons with distinct action.

Conversational Programming is fast and easy

  • Program parts right at the control or offline with your desktop PC
  • Centroid's Intercon generates the G codes for you.
  • Help screens for all the common turning cycles, just fill in the dimensions.
  • A graph of the part shows you your work as you go.
  • Automatic cleanout, Intercon auto creates the roughing and finish passes.
  • Fill in the blank programming. Threadmilling, Drilling, (3 types of cycles), Tapping (Rigid, Rigid peck tapping, Floating), Pocketing, Facing, Auto connect radius, Lines, Arcs, Math Help, Teach in and much more!
  • Convert geometry from DXF files to Centroid's Intercon* operations. Supports contouring, pocketing, framing, drilling, boring, tapping, & threading.

USB port for use with any USB Storage device

Quickly and easily load G code programs and DXF files into the control with a USB thumb drive. Downloading large G-code part programs generated from a CAD/CAM system is now fast and simple. The control automatically recognizes the USB thumb drive and a drive letter shows up on the load menu along with the built-in hard drive. You can even graph the G-code part programs directly from the USB thumb drive to identify the program you want before downloading into the control! USB drive support is a standard feature.Ethernet LAN connection, RS-232, and MPG connector are also standard features of the T400 CNC control.

CENTROID CNC Service and Support

Centroid CNC controls have a proven reliable track record and offer cool, quiet operation. Our controls are easy to maintain, with autotune, dragplot and self diagnostics. Centroid CNC users are supported by a nation wide network of local Factory Trained Technical Representatives who provide fast affordable service, training and upgrades. Centroid users can stay up with current technology with easy Centroid CNC software updates. In just minutes new CNC features can be added to the control.